Magpul Angled Fore-Grip: AFG/AFG2 Review
Moderator: ripjack13
11 posts
• Page 1 of 1
Magpul AFG® - Angled Fore Grip http://store.magpul.com/product/MAG411/88 Unlike conventional vertical fore-grips, the Magpul AFG (Angled Fore-Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, the AFG helps mitigate recoil and control the weapon, facilitating faster, more accurate follow-up shots. Made in U.S.A. Available Colors: Black Flat Dark Earth OD Green Foliage Features • Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub • Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~4" recommended) • All mounting hardware included Specifications ◦ Weight: 2.92 oz. ◦ Length: 5.55 in. ◦ Height, over rail: 1.75 in. ◦ Width, maximum: 1.77 in. MAGPUL® AFG™ (Angled Fore Grip) Theory http://cdn.magpul.com/downloads/AFG_Theory.pdf While most firearm accessories can enhance the performance and usability of a weapon, they generally maintain the same basic form and function of the component that they replaced. A certain stock or grip may be more comfortable, or magazine more reliable, but these upgraded parts change very little about the way a weapon is employed. Some equipment, however, is specifically designed to change the manual of arms or modify a shooter’s technique to increase speed and efficiency. Because simple plug and play does not apply, these are considered “Theory Based Products.” As tactics and techniques evolve to address the demands of a dynamic battlefield, so too must the weapons and equipment employed by the shooter. Recent years have seen a trend toward shorter, more compact rifles for urban and close quarters combat, along with a dramatic increase in weapon-mounted accessories. Rail systems, tactical lights, optics, lasers, sound suppressors, and of course, vertical fore grips have become commonplace on the battlefield, and are intended to increase efficiency and lethality. Of these accessories, only the vertical fore grip (VFG) attempts to improve weapon control and ergonomics. Unfortunately, depending on technique, the use of a VFG may actually decrease shooter lethality as measured by hit percentage, accuracy, and time to engage targets. This inefficiency can be explained by a number of factors, but the two primary reasons are the poor ergonomics of the vertical “broom handle” grip, and the placement of the weapon’s mass on top of the shooter’s fist, which decreases weapon point control. In an effort to avoid these VFG pitfalls, many shooters have adopted a “thumb break” grip that utilizes the VFG primarily as a reference point, rather than an actual grip. This technique places the non-dominant hand in front of the VFG, gripping the weapon hand guard. Although the thumb break grip can be effective, its ergonomics leave something to be desired. Unlike conventional vertical fore-grips, the AFG (Angled Fore-Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter’s hand high on the centerline of the bore, the AFG helps mitigate recoil and control the weapon, facilitating faster, more accurate follow-up shots. "We live in a society of wolves. You do not fight back by creating more sheep."
|
|
AFG2™ - Angled Fore Grip (GEN 2)
http://store.magpul.com/product/MAG414/88 The AFG2 is a slim line design that is shorter in overall length and width compared to the AFG. Smaller size allows for compatibility with a wider variety of rail systems, rail covers, and accessory mounts. The overall length has been reduced by .87” to minimize footprint, bulk, and weight. Available Colors: Black Flat Dark Earth OD Green Foliage Features • Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub • Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~3" recommended) • All mounting hardware included Specifications ◦ Weight: 2.53 oz. ◦ Length: 4.70 in. ◦ Height, over rail: 1.94 in. ◦ Width, maximum: 1.37 in. "We live in a society of wolves. You do not fight back by creating more sheep."
|
|
Yet another awesome review my friend...well done !!
|
|
.410
Posts: 65
Joined: Sat Oct 29, 2011 4:05 pm Location: Ontario, Canada |
Yes, thanks for this review. I had seen this kind of grip before, but did not know what it was all about until now. Looks like something I would like to try.
Canadian Reload Radio - Canada's Premier Pro-Gun Podcast
|
Thanks fellas.
uberkermit, give it a try and let us know what you think. It's a great add-on for the price and I highly doubt you'll be disappointed... "We live in a society of wolves. You do not fight back by creating more sheep."
|
|
Lazy, great review, and you know i like mine too!
I chose it for similar reasons, but my issues being arthritis. The AFG isnt really intended for shotguns, but it has become very popular with shotgunners for some very good reasons. It works best using the push/pull style of shooting, not necessarily with wing shooting, though I have recently started using mine while hunting quail and pheasant. You shoot the way you practice... RossignolST
on YouTube brad@mossbergowners.com "No free man shall ever be procluded the use of arms." Do right and fear nothing! |
|
Thanks Brad!
Love the pic... "We live in a society of wolves. You do not fight back by creating more sheep."
|
|
◦
MAGPUL® AFG™ (Angled Fore Grip) Theory http://cdn.magpul.com/downloads/AFG_Theory.pdf if when aiming like this you point your leading finger along the barrel you will find ,with practice, you will point instintively at your target. an aid to quicker target aquisation. Otis
|
|
^ makes sense to me...
"We live in a society of wolves. You do not fight back by creating more sheep."
|
|
my brother,who has experience in far away places with these things,taught me that. unfortunately he didnt buy me one so i'll have to wait to see if santa does.
thats his rock river on top and my parts bucket below. Otis
|
|
11 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests